Lang

Industry News

GREEN TELECOM TECHNOLOGY CO.,LTD
Located in Ningbo,China.

Home / News & Events / Industry News / Two Types of Fiber-Optic Terminations

Two Types of Fiber-Optic Terminations

Fiber-optic cables act as wave guides for light, primarily in high-speed data communications and to transmit pictures to video equipment. The cables are made from glass fibers usually manufactured from silica, but other materials also can be used for special purposes. Fiber-optic terminations happen at the end of a cable where it connects to a piece of equipment or to another cable. The connection of two cables is called a splice. A fiber-optic cable termination that attaches to a piece of equipment is called a connector. Cables are manufactured in two types. Single-mode cable is generally a long-distance cable, is thinner and is more difficult to work with, but it transmits light better and is capable of higher throughput. Multi-mode cable is thicker and finds use mainly in short-distance applications such as computer networks in buildings. The fiber-optic terminations for both types of cable are similar, but most terminations for single-mode cable take place in a factory, whereas multi-mode terminations often take place in the field. Single-mode fiber-optic terminations that take place in the field are often repairs necessitated by damage to the cable or its connectors. Splices can rejoin and repair damaged fiber-optic cables. Multi-mode cables can be spliced, but this is usually unnecessary. A multi-node cable is shorter, so a broken cable can often be easily replaced, and splicing is unnecessary. The techniques for polishing single-mode and multi-mode cable are different, and many fiber-optic cable installers lack the training for making single-mode terminations. Most fiber-optic terminations to connectors made in the field will be on multi-mode cable and will use some type of adhesive termination. Adhesive terminations use epoxy to hold a cable in place inside the connector. Each fiber-optic connector manufacturer supplies its own recommended epoxy adhesive and the method of using it. Another method places the epoxy inside the connector at the factory. The connector is heated to melt the adhesive, and the fiber-optic cable is then placed inside the connector. Crimp-type connectors were once less reliable for Fiber Optic Termination Box, but advances in these types of connectors have made them a viable alternative to adhesive connectors. The ends of the cable still must be cut and polished, but the cable is held in place by a mechanical crimp rather than by epoxy glue. One advantage of crimp connectors is not having to wait overnight for epoxy adhesive to harden.

Recommended Products