Industry News

GREEN TELECOM TECHNOLOGY CO.,LTD
Located in Ningbo,China.

Home / News & Events / Industry News / INTRODUCTION OF VARIOUS FIBER OPTIC INTERFACE TYPES OF FIBER OPTIC TRANSCEIVERS

INTRODUCTION OF VARIOUS FIBER OPTIC INTERFACE TYPES OF FIBER OPTIC TRANSCEIVERS

Fiber Optic Splice Closure It is one of our products. The following will introduce various types of optical fiber interfaces of optical fiber transceivers.

  There are many different classifications of fiber optic transceivers, but in actual use, most of the attention is paid to the categories distinguished by different fiber optic connectors: SC connector fiber optic transceivers and FC/ST connector fiber optic transceivers. Typical interface types of fiber optic transceivers include Ethernet interface, E1 interface, serial interface (RS232), SC/ST interface, USB interface, etc. Next, let's follow the editor of Feichang Technology to learn more about it!

  First, the interface type of fiber optic transceiver

  1. Ethernet interface

  Interface standard: IEEE802.3

  Terminal rate: 10M/100/1000Mbps

  Working mode: full duplex, half duplex

  Terminal connector: RJ45 interface

  2. E1 interface

  Network interface: G.703, G.704, G.823

  Network speed: 2.048Mbps

  Network connector: BNC (75 ohm), etc.

  Line code: HDB3 code

  3. serial interface

  Interface rate: 19200bps

  Interface standard: RS-232

  4. SC/ST interface

  ST interface: 10Base-F

  SC interface: 100Base-FX

  5. USB interface

  USB1.1: 12Mbps

  USB2.0: 480Mbps

  2. Introduction of various optical fiber interface types

  fiber optic connector

  1. FC round with thread (the most used on the patch panel)

  2. ST snap-on round type

  3. SC card connection type (the most used on router switches)

  4. PC microsphere grinding and polishing

  5. The APC is at an 8-degree angle and the microsphere is ground and polished

  6. MT-RJ square, one dual fiber transceiver (useful for Huawei 8850)

  Optical fiber modules: generally support hot swap,

  1. GBIC Giga Bitrate Interface Converter, the fiber interface used is mostly SC or ST type/

  2. SFP small package GBIC, the optical fiber used is LC type

  Fiber used:

  1. Single mode: L, wavelength 1310 single mode long distance LH wavelength 1310,1550

  2. Multimode: SM wavelength 850

  Fiber Rosette is also one of our products, welcome to visit our website!

Recommended Products